Valby GR-60
The GR-60 Grapple is a good choice for medium truck cranes.
Valby GR-60 |
|
| Max. gripping width | 60 ½" |
| Min. opening | 3 ½" |
| Max. lifting capacity | 6600 lb. |
| Height. open | 38 3/8" |
| Height. closed | 20 ½" |
| Width of wider claw | 15 " |
| Working pressure | 2900 psi |
| Jaw material | Weldox 700 |
| Weight | 410 lb. |
| Recommended Rotator: | R 6 |
- Weldox 700 is a prime steel used in the manufacture of high quality log grapples.
- All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.
- Large, powerful cylinders.
- Double connection rods provide good balance and less stress.
- A belly plate protects the cylinder from underneath.
- Modern bypass grapple design
- The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems. The grapples also close to a tight minimum opening.
The Valby GR 60 closes down to 3 ½ inches.
Every joint has a bronze bearing with a grease fitting.