 |
The Valby GR 50 HD is suitable for use on smaller truck loaders. |
| Valby GR-50 HD | |
| Max. gripping width | 50 3/4" |
| Min. opening | 3 1/2" |
| Max. lifting capacity | 3960 lb. |
| Height. open | 26 3/8" |
| Height. closed | 19 1/8" |
| Width of wider claw | 11 1/2" |
| Working pressure | 2900 psi |
| Jaw material | Weldox 700 |
| Weight | 231 lb. |
| Recommended Rotator: | R 45 |
- Modern bypass grapple design.
- Weldox 700 is a prime steel used in the manufacture of high quality log grapples.
- All Valby grapples have a bronze bushing at every joint, and every joint has a grease fitting.
- Large, powerful cylinder.
- Double connection rods provide good balance and less stress.
- A belly plate protects the cylinder from underneath.
- Modern bypass grapple design
- The Valby bypass grapples have excellent geometry. The form of the claws enables a smooth roll in of the stems. The grapples also close to a tight minimum opening.